This helped me. My expensive CostCo electric dual motor love seat stopped working on one recliner. Sure enough, underneath it next to the motor there is a small extra plug that goes into the motor that came undone. As soon as I plugged it in everything worked.
I about drove myself crazy trying to figure out why my reclining sofa stopped working…..I didn't know about the cut off button! Thank you for making this clear and simple, I have my couch back!
Oh, good shout – just keep pressing buttons and checking connections. Chair hasn't been working for a week. It was your comment of the connections to and from the motor that did the trick
Thank you! We had checked everything beforehand but thankfully watched your video til the end. Thank you!! Your last statement about waiting for the motor to reset itself worked.
I had a chair that would only lift and not recline. This is how I fixed it. The controller had fallen down and some plastic broke inside that was holding a screw. So the screw was rattling around in there. And, the screw ended up getting lodged onto the circuit board. This interefered with the signals on the remote. To fix, Unplug your chair and unscrew the 4 screws on the back of your remote. Then unscrew the circuitboard from the remote and remove the screw. If you have had a rattling remote for a while and it stops working this maybe the issue.
What does it mean when the remote flashes and nothing else happens? Nothing in the manual, nothing comes up when you google this subject. Anyone else had this problem?
good video thank you. Do you think I can make ashley recliner button on the side extended to use as hand control for someone with physical difficulties to be able to have it on lap or tv tray? I would love any help you could give– thank you!
Awesome. Thanks a lot. That last thing you said in the video made my day. My recliner was refusing to go back to normal position after extending it fully. As you said, I just unplugged it for few mins and plug it back again, miracle happened. It started working normal again. Once again THANKS.
I don’t know what surprises me more, how dumb this video is or how dumb people are in the comments that can’t trace a cable.
This helped me. My expensive CostCo electric dual motor love seat stopped working on one recliner. Sure enough, underneath it next to the motor there is a small extra plug that goes into the motor that came undone. As soon as I plugged it in everything worked.
I about drove myself crazy trying to figure out why my reclining sofa stopped working…..I didn't know about the cut off button! Thank you for making this clear and simple, I have my couch back!
Thank You! Saved me money!
thanks man didnt realize there were that many connections. this video actually helped
Oh, good shout – just keep pressing buttons and checking connections. Chair hasn't been working for a week. It was your comment of the connections to and from the motor that did the trick
Thanks that was good straight forward solution. It worked for me.
Fucking idiot
ridiculous,really this is a waste of time.
thanks! my headset works but chair doesn't…it opened now won't shut…will do these steps!
I never dreamed there were that many things that had to be plugged in! Mine just stopped working. Hoping I can get it back working! Thank you!
Thank you, I've fixed my chair now☺
Thank you! We had checked everything beforehand but thankfully watched your video til the end. Thank you!! Your last statement about waiting for the motor to reset itself worked.
Helped me a lot. Thanks
”It's more than I expected. Gives great massage.i like deep massage and it's perfect>>>t.co/CqLS2Lgrp0 It's been one month so far very happy with it.”
Didn’t think to check cords because the light on my wand was on… turns out my transformer has two 9v battery backups, and the chair was unpluged
I had a chair that would only lift and not recline. This is how I fixed it. The controller had fallen down and some plastic broke inside that was holding a screw. So the screw was rattling around in there. And, the screw ended up getting lodged onto the circuit board. This interefered with the signals on the remote. To fix, Unplug your chair and unscrew the 4 screws on the back of your remote. Then unscrew the circuitboard from the remote and remove the screw. If you have had a rattling remote for a while and it stops working this maybe the issue.
"make sure not to put chair on top of cord" – Then puts chair on top of cord…
My chair will go up but only come back down to sitting position. Foot rest will not come out so chair can recline
Thanks for your very informative video! It came in handy last night when our recliner stopped mid-recline.
What does it mean when the remote flashes and nothing else happens? Nothing in the manual, nothing comes up when you google this subject. Anyone else had this problem?
good video thank you. Do you think I can make ashley recliner button on the side extended to use as hand control for someone with physical difficulties to be able to have it on lap or tv tray? I would love any help you could give– thank you!
Awesome. Thanks a lot. That last thing you said in the video made my day.
My recliner was refusing to go back to normal position after extending it fully.
As you said, I just unplugged it for few mins and plug it back again, miracle happened. It started working normal again. Once again THANKS.
Ridiculous to waste time on making a video to tell people to make sure their chair is plugged in.
Geez how did you get soo many gremlins?
REALLY!? dur dur dur dur dur dur
thank you! I checked all connection points, or so I thought. watching your video saved me a service call. thanks again!
Thank you for this helpful video.
It this guy for real?
Stay in school kids! Study hard and make something of yourself so you don't end up like this guy.
I rolled my eyes at first but checked anyway. My unit was a sales floor one and they sewed the transformer under the chair. This vid saved me.