A walkthrough step-by-step guide on how to set up a Ubiquiti device to connect to a remote access point or hotspot in order to share internet with multiple local devices. Ideal for boat, RV, or other similar users who may have to search for new APs to connect to frequently.
source
Connecting to a Remote AP in Router Mode
no internet connection but im connected.
me sale invalit credentialsss!
Resolved my problem of setting up the nanaostation to my wireless router. Works perfect. A BIG THANK YOU!
How to Make the Nano Bridge m5 Tower receives a signal router please
CARA DE PINCHO
https://dl.ubnt.com/firmwares/XN-fw/v6.1.7/XM.v6.1.7.32555.180523.1809.bin
How could I back from default ubnt page to router page ??
Username and password is UBNT (lowercase)
username and password not work help me how can i login in my airos
I tried this with WPA and WPA2.. There is no option to input the password/ Does this support WPA and WPA encryption?
Not working
Where can I get the complete step by step setup for the Bullet TI so I can hook it to a wifi router in my RV? And can I just plug the POE adapter LAN port into the internet side of aNY ROUTER? I have a Netgear Nighthawk and I have a R36 Alpha. I want to if possible use the R36 with the Bullet TI since I bought a couple of them I have a invested amount of cash outlay but can't seem to make the bullet work other than as a Wi-Fi adapter for my laptop when using the Ethernet port. I have been trying to hook it to a Wavlink ac600 high power outside type unit but can't figure that out either. I can get the Wavlink to act as a repeater by itself and am able to use the Ethernet port on it with the laptop to get to the internet. But when I try to put the Wavlink in AP mode and hook it to the Bullet TI I can't get that to work. So am needing help big time with this! My big goal is to have the Bullet TI outside my RV and a normal Wi-Fi Router inside the RV. Any help would be great!
Thanks 73 Jimmy, WX9DX
alguem sabe o longuim ea senha do Airos ??
can i connect to any router like tp link or dlink using the airgrid m2 hp ? and use it as a repeater ?
when you show main it is seen that the wireless setup is not "station" but access point. I bet the signal is your own signal
My Ubiquiti air router is so slow an when I do a speed test it will always be at 0.88 mbps or 1.0 mbps I WANT FAST INTERNET CONNECTION AT LEAST GIVE US A GIGABIT OR MORE NOT YOUR SLOW WIFI (0.00 MBPS TO 1.00 MBPS) I went to 192.168.1.1 and then I did not find a way to make my wifi fast you guys suck try to be like TP-LINK because they made this new router called the TP-LINK Archer C 5400 which is breath taking fast at connection speeds up to 5400 mbps per second not 1.0 mbps what's that bring back my money please and I will give you back the router. booooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
how can i enter that site i typed the same address but it didn't work
The username and the password wont work for me.. Invalid credentials.
admin – admin is not working mate any solution ?
username and pasword in spanish "please"
can i use AirOs for receiving wifi signals
Invalid credentials.
what
Can this work with AirGrid M2?
Hi there
Firstly thanks for the teaching video
Secondly is that way worked with nanostation m5 ??
Thirdly can my nanostation m5 received from 2.4 Ghz router in any possible way??
Please help me
Thanks
My regards
i buy nonastation M5, it is the same procedure for M2? i use the IP but cant connect or wont open, sometimes its open but when you change the settings, its appear no network connection help pls… TIA.
any thoughts?
i have a picostation m2-hp. I am trying to connect it in router mode to a "xfinitywifi" ap. it is comcast's free hotspots. I can connect, but I don't get an ip. AFAIK it requires me to enter a username/password into their website then i am good to go. Is there a way for my picostation to handle this ? Like i said it connects but no IP, and falls back to the default fallback ip. I tried router mode with PPPOE but that didn't work either.
Can someone connect into my router and use the wifi settings to get internet for free and i wouldnt know about it OR do they need to know the key for wireless and live close to the router for signal strength,ie (a neighbour)
is that how this can work
Which systems does this process work with?
I cannot get to work on the Nanostation Loco M900, when ever I hit the "select" button, nothing shows up, it scans but nothing is found?? It seems to only look for 900 MHZ AP's and no other AP's(it does not scan any 2.4 ghz points), is this as designed or am I doing something wrong.